General information

JUMBO

General information The JUMBO rolled steel telescopic ball bearing drawer runner can handle super heavy duty applications up to 325 kg and an extension up to 130%.
  • Load capacity

    Load capacity

    325 kg
    716.50 lbs
    (Load capacity is based on < 10.000 cycles)
  • Width

    Width

    19.1 mm
    0.75 inch
  • Height

    Height

    76.2 mm
    3 inch
  • Travel

    Travel

    full extension 100%
  • Travel

    Travel

    over extension 130%
Product features
JUMBO
Product features The JUMBO rolled steel telescopic ball bearing drawer runner can handle super heavy duty applications up to 325 kg and an extension up to 130%.

  • Surface treatments

    • Bright Zinc Chromate - Black passivation
    • Bright zinc chromate - blue passivation
    • Electrodeposited coating

  • General

    • Noise reduction
Technical information
JUMBO
Technical information The JUMBO rolled steel telescopic ball bearing drawer runner can handle super heavy duty applications up to 325 kg and an extension up to 130%.
  • Supports loads up to 325 kg
  • Available lenghts up to 2000 mm
  • The JUMBO slides are standard available in stock with lock-in, lockout or lock-in/out front release features.
  • Add fixations such as tabs, holes, press inserts, a drawer carrier or threated studs
  • The JUMBO can be incorporated into our UDL and Soft Close Column systems.

Please visit the product features tab on the product page to find out more information about our customizations. In case of customization or any questions about the slide, feature or functionality please contact a sales manager.

Fixation recommendations

Cabinet side
Metal:    M5 / DIN 7984
              M5 / M6 / ISO 7380
Drawer side
Metal:    M5 / DIN 7984
              M5 / M6 / ISO 7380

Load capacity
Load capacity varies as the result of a number of factors. Main factors being the type of slide, length, and ratio between pull-out length and closed length. Another important factor is the number of cycles the slide is required to make. Thomas Regout distinguishes the type of usage between dynamic use and static use. Other factors that influence the load capacity are the features the slide is equipped with, and how it is mounted. Slides are usually mounted sideways so all data concerning load-capacity will be given for sidemounted use. For information about the load capacity with bottom-mounted slides, please contact our sales department.

Dynamic load capacity
In order to determine the dynamic load capacity, all types of Thomas Regout slides have been tested for 50.000 cycles. Their maximum load capacity is compliant with, or exceeds, all common national and international standards including DIN, BIFMA, BS, EN and JIS. The dynamic load capacity figures can be found in the graph below.

Static load capacity
Static load capacity is based on test results at 500, 1.000 and 10.000 cycles. This is most common for industrial purposes. The static load capacity is considerably higher than the dynamic load capacity for all slides. The static load capacity figures listed below were determined for a single length of that slide and are for indication purposes only. Specific applications can be assessed by our R&D department and tested if necessary. 

Extension
Extension is defined as the ratio of the travel length of the slide (T) and the lenght of the slide in closed position (L): T = (T/L)*100%. The influence of the extension and length of the slide on the load capacity is shown in the above table.

Thermal resistance
Maximum temperature approx. 80°C, determined by applied plastics and lubrication.
Minimum temperature approx. -20°C, determined by applied plastics and lubrication.

Attention: maximum and minimum temperature are strongly determined by the specific application; duration of exposure, impact and other forces on slide and slide components etc. Values mentioned are indicative, it is important to judge each individual application.

Materials
Thomas Regout slides are available in numerous materials and coatings. Below is an overview of all the materials used in our slides. All our products are compliant with EU ROHS standards.

Sections:

Cold rolled, low carbon and high yield strength steel according to EN 10268 and EN 10139

Stainless steel according to EN 10088-2 and EN 10259

Ball cages: HDPE en PA.
Ball bearings: Hardened carbon steel C15, Kl 4 DIN 5401
Locking features: PA, PE, PBTP, TPU, EPDM
Sequence devices: PA, TPU, PP Bumpers: RR PA, TPU, EPDM
Lubrication: Heavy duty ball bearing grease (free of lead), based on mineral oil

Surface treatment (finishing)
Our slides are available in a selection of standard finishes. These finishings can be found in the feature list. The overview provides information about which slide can have a specific surface treatment. If you require an alternative or specialized finish not listed, please contact us for further information.

Product images
JUMBO
Product images The JUMBO rolled steel telescopic ball bearing drawer runner can handle super heavy duty applications up to 325 kg and an extension up to 130%.
JUMBO - TR 7619 | Telescopic slides | Thomas Regout International B.V.
JUMBO - TR 7619 | Telescopic slides | Thomas Regout International B.V.
JUMBO - TR 7619 | Telescopic slides | Thomas Regout International B.V.
JUMBO - TR 7619 | Telescopic slides | Thomas Regout International B.V.
CAD Centre
JUMBO
CAD Centre The JUMBO rolled steel telescopic ball bearing drawer runner can handle super heavy duty applications up to 325 kg and an extension up to 130%.

EU

General downloads

Product leaflet TR-7619
Product leaflet TR-7619 (544 kb)
Manual Telescopic Slides
Manual Telescopic Slides (1 Mb)

DWG downloads

TR-7619_500_500
TR-7619_500_500 (1 Mb)

PDF downloads

TR-7619_500_500
TR-7619_500_500 (278 kb)

STEP downloads

TR-7619_500_500
TR-7619_500_500 (3 Mb)

US

News
Marco Kleuters is our new managing director
Officially certified for carbon-neutral gas consumption and sustainable electricity usage!
Professional storage solution in motion
The HORSE project
Article about our partnership with Robotize