FINN 2 TR-3714
-
Load capacity
78 kg
171.96 lbs
(Load capacity is based on < 10.000 cycles) -
Width
13.5 mm
0.53 inch -
Height
37 mm
1,46 inch -
Travel
single extension 75 %
Bumper without hold closed
-
Fixations
Countersunk holes
-
Surface treatments
- Bright zinc chromate - blue passivation
-
General
-
Packed per pair in shrink wrapped foil
⨯
Packed per pair in shrink wrapped foil
- Recommended fitting space
-
TR-3714 FINN 2
- Single extension telescopic drawer slide
- Bumper without hold closed and countersunk holes for fixation
- Supports medium to heavy loads up to 78 kg
- Perfect for light to medium duty applications such as; kitchen and bathroom drawers
- Also perfect for automotive and industry segment
|
lenght mm/ inch
|
travel mm / inch
|
cycles 10.000 kg/inch
|
cycles 100.000 kg/inch
|
art.nr.
|
fixation
|
|
300 mm / 11.8"
|
205 mm / 8.1”
|
78 kg / 171.9 lbs
|
60 kg / 132.3 lbs
|
107230F
|
Cabinet side
|
|
350 mm / 13.8"
|
239 mm / 9.4”
|
63 kg / 138.9 lbs
|
49 kg / 108 lbs
|
107231F
|
Metal: M4 / DIN 7984
|
|
400 mm / 15.7"
|
289 mm / 11.4”
|
54 kg / 119 lbs
|
42 kg / 92.6 lbs
|
107232F
|
M4 / M5 / ISO 7380
|
|
450 mm / 17.7"
|
339 mm / 13.3”
|
46 kg / 101.4 lbs
|
36 kg / 79.4 lbs
|
107233F
|
Wood: 5,0 / DIN 7997
|
|
500 mm / 23.6"
|
373 mm / 14.7”
|
54 kg / 119 lbs
|
42 kg / 92.6 lbs
|
107234F
|
Drawer side
|
|
600 mm / 23.6" |
457 mm / 18”
|
56 kg / 123.5 lbs
|
43 kg / 94.8 lbs
|
107236F
|
Metal: M4 / DIN 965 / ISO 7046
|
|
700 mm / 27.6”
|
541 mm / 21.3”
|
56 kg / 123.5 lbs
|
43 kg / 94.8 lbs
|
107238F
|
M4 / DIN 7500
|
|
Wood: 4,5 / DIN 7997
|
Load capacity
Load capacity varies as the result of a number of factors. Main factors being the type of slide, length, and ratio between pull-out length and closed length. Another important factor is the number of cycles the slide is required to make. Thomas Regout distinguishes the type of usage between dynamic use and static use. Other factors that influence the load capacity are the features the slide is equiped with, and how it is mounted. Slides are usually mounted sideways so all data concerning load-capacity will be given for sidemounted use. For information about the load capacity with bottom-mounted slides, please contact our sales department.
Dynamic load capacity
In order to determine the dynamic load capacity, all types of Thomas Regout slides have been tested for 100,000 cycles. Their maximum load capacity is compliant with, or exceeds, all common national and international standards including DIN, BIFMA, BS, EN and JIS. The dynamic load capacity figures can be found in the graph below.
Static load capacity
Static load capacity is based on test results at 500, 1000 and 10,000 cycles. This is most common for industrial purposes. The static load capacity is considerably higher than the dynamic load capacity for all slides. The static load capacity figures listed below were determined for a single length of that slide and are for indication purposes only. Specific applications can be assessed by our R&D department and tested if necessary.
Extension
Extension is defined as the ratio of the travel length of the slide (T) and the lenght of the slide in closed position (L): T = (T/L)*100%. The influence of the extension and length of the slide on the load capacity is shown in the graph below
Thermal resistance
Maximum temperature approx. 100°C, determined by applied plastics and lubrication.
Minimum temperature approx. -20°C, determined by applied plastics and lubrication.
Attention: maximum and minimum temperature are strongly determined by the specific application; duration of exposure, impact and other forces on slide and slide components etc. Values mentioned are indicative, it is important to judge each individual application.
Materials
Thomas Regout slides are available in numerous materials and coatings. Below is an overview of all the materials used in our slides. All our products are compliant with EU ROHS standards.
Sections:
- Cold rolled, low carbon and high yield strength steel according to EN 10268 and EN 10139
- Pre-galvanised low carbon and high yield strength steel according to EN 10147 and EN 10139
- Stainless steel according to EN 10088-2 and EN 10259
- Ball cages: Electrolitically galvanised, cold rolled, low carbon and high yield strength steel according to EN 10131 and EN 10152
- Ball bearings: Hardened carbon steel C15, Kl 4 DIN 5401
- Locking features: PA, PE, PBTP, TPU, EPDM
- Sequence devices: PA, TPU, PP Bumpers: RR PA, TPU, EPDM
- Lubrication: Heavy duty ball bearing grease (free of lead), based on mineral oil
Stainless steel
More and more telescopic slides are used in new applications which requires very high corrosion resistance. Due to this fact, Thomas Regout has created the possibility to supply its total product range in stainless steel according to EN 10088-2 and EN 10259. Please inform us about your requirements to create the slide you need. Surface treatment:Our slides are available in a selection of standard finishes to the specifications listed below. If you require an alternative or specialized finish not listed, please contact us for further information
Surface treatment (finishing)
Our slides are available in a selection of standard finishes. These finishings can be found in the feature list. The overview provides information about which slide can have a specific surface treatment. If you require an alternative or specialized finish not listed, please contact us for further information.
TR-3714 FINN 2 Single extension telescopic slide for medium weights with hold in bumper. Below you can download the stepfile, .PDF and other technical specifications which belong to the single extension slide FINN 2 TR-3714.
EU
General downloads
CAD downloads
DWG downloads
