General information

TITAN B TR-7120

General information Full extension telescopic ball bearing slide with drawer carrier and bumper with hold-in feature. Supports loads up to 189 kg and is part of our heavy duty slide range.

Load capacity

189 kg
416.67 lbs
(Load capacity is based on < 10.000 cycles)
Width

18,4 mm
0.72 inch
Height

70.9 mm
2.79 inch
Travel

over extension 130%

Product features

TITAN B TR-7120

Product features

Closed position
- Bumper with hold closed ⨯
  Bumper with hold closed
  This bumper prevents the slide from opening by itself in its closed position. It also reduces the sound produced when the slide reaches the end of its travel.

Fixations

Surface treatments
- Bright zinc chromate - blue passivation

General
- Packed per pair in shrink wrapped foil ⨯
  Packed per pair in shrink wrapped foil
- Recommended fitting space

Technical information

TITAN B TR-7120

Technical information

TITAN B TR - 7120

Full extension telescopic ball bearing drawer slide with an extension up to 130 %
Drawer carrier for easy mounting and hold in bumper feature
Supports loads up to 189 kg
Part of our heavy duty slide range
Perfect for but not limited to heavy loaded storage systems for kitchens and shopfitting applications

length mm/inch	travel mm/inch	cycles 10.000 kg/lbs	cycles 100.000 kg/lbs	art.nr.	fixation
400 mm / 15.7"	435 mm / 17.1”	157 kg / 346.1 lbs	97 kg / 213.8 lbs	101S03F	Cabinet side
450 mm / 17.7"	485 mm / 19.1”	160 kg / 352.7 lbs	103 kg / 227.1 lbs	101S04F	Metal: M5 / DIN 965 / ISO 7046
500 mm / 19.7"	545 mm / 21.5”	169 kg / 372.6 lbs	115 kg / 253.5 lbs	101S05F	M5 / DIN 7500
550 mm / 21.7"	595 mm / 23.4”	187 kg / 412.3 lbs	118 kg / 260.1 lbs	101S06F	Wood: 5,0 / DIN 7997
600 mm / 23.6"	650 mm / 25.6”	189 kg / 416.7 lbs	118 kg / 260.1 lbs	101S07F
700 mm / 27.6”	750 mm / 29.5”	187 kg / 412.3 lbs	137 kg / 302 lbs	101S08F	Drawer side
					Metal: M3 / DIN 7985 / ISO 7045
					Wood: 3,0 / DIN 7997

Load capacity

Load capacity varies as a result of a number of factors. The main factors being the type of slide, length, and ratio between pull-out length and closed length. Another important factor is the number of cycles the slide is required to make. Thomas Regout distinguishes the type of usage between dynamic use and static use. Other factors that influence the load capacity are the features the slide is equipped with, and how it is mounted. Slides are usually mounted sideways so all data concerning load-capacity will be given for side mounted use. For information about the load capacity with bottom-mounted slides, please contact our sales department.

Dynamic load capacity
In order to determine the dynamic load capacity, all types of Thomas Regout slides have been tested for 100,000 cycles. Their maximum load capacity is compliant with, or exceeds, all common national and international standards including DIN, BIFMA, BS, EN and JIS. The dynamic load capacity figures can be found in the graph below.

Static load capacity
Static load capacity is based on test results at 500, 1000 and 10,000 cycles. This is most common for industrial purposes. The static load capacity is considerably higher than the dynamic load capacity for all slides. The static load capacity figures listed below were determined for a single length of that slide and are for indication purposes only. Specific applications can be assessed by our R&D department and tested if necessary.

Extension
Extension is defined as the ratio of the travel length of the slide (T) and the lenght of the slide in a closed position (L): T = (T/L)*100%. The influence of the extension and length of the slide on the load capacity is shown in the graph below

Thermal resistance
Maximum temperature approx. 100°C, determined by applied plastics and lubrication.
Minimum temperature approx. -20°C, determined by applied plastics and lubrication.

Attention: maximum and minimum temperature are strongly determined by the specific application; duration of exposure, impact and other forces on slide and slide components etc. Values mentioned are indicative, it is important to judge each individual application.

Materials
Thomas Regout slides are available in numerous materials and coatings. Below is an overview of all the materials used in our slides. All our products are compliant with EU ROHS standards.

Sections:

Cold rolled, low carbon and high yield strength steel according to EN 10268 and EN 10139
Pre-galvanised low carbon and high yield strength steel according to EN 10147 and EN 10139
Stainless steel according to EN 10088-2 and EN 10259

Ball cages: Electrolitically galvanised, cold rolled, low carbon and high yield strength steel according to EN 10131 and EN 10152
Ball bearings: Hardened carbon steel C15, Kl 4 DIN 5401
Locking features: PA, PE, PBTP, TPU, EPDM
Sequence devices: PA, TPU, PP Bumpers: RR PA, TPU, EPDM
Lubrication: Heavy duty ball bearing grease (free of lead), based on mineral oil

Stainless steel
More and more telescopic slides are used in new applications which requires very high corrosion resistance. Due to this fact, Thomas Regout has created the possibility to supply its total product range in stainless steel according to EN 10088-2 and EN 10259. Please inform us about your requirements to create the slide you need. Surface treatment: Our slides are available in a selection of standard finishes to the specifications listed below. If you require an alternative or specialized finish not listed, please contact us for further information

Surface treatment (finishing)
Our slides are available in a selection of standard finishes. These finishings can be found in the feature list. The overview provides information about which slide can have a specific surface treatment. If you require an alternative or specialized finish not listed, please contact us for further information.

Product images

TITAN B TR-7120

Product images